How to Charge Bluetooth Earbuds Easy To Follow Steps:

Wireless earbuds are all the rage, but How to Charge Bluetooth Earbuds? It can be easy to forget to charge your Bluetooth earbuds, but if you want them to last you through a long day or flight, it’s important to know how to charge them properly. In this post, we’ll walk you through the steps for charging your Bluetooth earbuds and offer some tips for making the most of their battery life.

How to Charge Wireless earbuds via cable:

Step 1: Plug the Charger Correctly

Step 2: Locate the Charging Port

Step 3: Insert Charging Cable into Port

Step 4: Check the Indicator that earbuds are charging.

Step 5: Leave on charge for 2-3 Hours

You Might Be Interested In A Complete Guide: Best True Wireless Earbuds Under $100

How to Charge Bluetooth Earbuds

1. Start by plugging the charging cable into a power source. If you’re using a wall charger, make sure that the voltage is correct for your earbuds.

2. Once the power source is connected, locate the charging port on your earbuds. This is usually located on the back or bottom of the earbud.

3. Gently insert the charging cable into the charging port. You should feel a slight click as the connector is securely seated in the port.

4. Depending on your earbuds, light may come on to indicate that they are charging. If there is no light, don’t worry – this doesn’t necessarily mean that the earbuds aren’t charging.

5. Leave your earbuds to charge for the recommended amount of time. This will vary depending on the model but is typically between 2 and 3 hours.

Once your earbuds are fully charged, you’ll be able to enjoy music, podcasts, or phone calls without worrying about battery life. And if you follow the tips below, you can further extend the battery life of your Bluetooth earbuds.

How to charge true wireless earbuds with a Charging case:

Some people have questions that how to charge Bluetooth earbuds from case? Well, most true wireless earbuds come with a charging case that holds extra battery power to keep your earbuds charged when you’re on the go. To charge the earbuds, with a charging case follow these simple steps:

1. Open the charging case lid. You’ll see a LED light on the front of the case that shows how much power is left in the case. If not, check your user manual for more instructions.

2. If the earbuds are not already docked in the case, dock them now. Make sure they snap securely into place.

3. Close the lid.

4. Connect the charging case to a power source using the included USB cable. The LED light will turn red, indicating that it’s charging.

5. Once the LED light turns green, or in some cases blue, your earbuds and case are fully charged.

By following these steps, you can charge your earbuds fully in about 2 hours.

If you’re in a hurry and need a quick boost of power, most charging cases also have fast charging capabilities. This means that you can get up to 1 hour of listening time after just 15 minutes of charging. Consult your user manual to see if your earbuds’ charging case has this feature.

How to charge just the earbuds:

1. Open the case lid and take out the earbuds

2. Connect the small end of the charging cable to the charging port on the back of the earbud

3. Connect the USB end of the charging cable to a USB power source

4. The LED indicator on the earbuds will flash red and white to indicate that they are charging

5. When the earbuds are done charging, the LED indicator will turn solid white or green.

How to charge Bluetooth Earphones:

Follow these steps to charge your Bluetooth Headphones easily:

1. Plug the small end of the USB cable into the charging port on the bottom of the left earbud.

2. Plug the other end of the USB cable into a USB power adapter, then plug the adapter into a power outlet. Or, you can plug the USB cable into a computer’s USB port.

3. A solid red light appears on the Headphones.

4. When the red light turns off, the earbud is fully charged.

5. It takes about 1.5 – 2 hours to fully charge the headphones.

Once they are done charging, you will be able to use them for up to 8 hours before needing to charge them again.

How to know if earbuds are fully charged:

After you’ve charged your earbuds, it’s important to know if they’re actually fully charged. If you’re not sure, there are a few ways to check:

1. Look at the charging case: Most charging cases will have LEDs that indicate how much charge is left. If the earbuds are fully charged, the LEDs will be green or blue.

2. Look at the earbuds themselves: Some earbuds will have a LED light on them that changes color to indicate how much charge is left. If the earbuds are fully charged, the LED will be green or blue.

3. Check the app: If your earbuds have an accompanying app, it may have a battery indicator that shows the battery life in percentage.


The answer is yes, but it’s not recommended. The earbuds themselves have a built-in battery, and when placed in the charging case, they receive power from the case’s battery.

If you were to charge the earbuds without the case, they would receive power from their own battery, and it would take longer and the earbuds could become damaged.

It’s also important to note that if your earbuds are connected to a Bluetooth device, they will continue to drain power even when not in use. So, if you’re planning on charging your earbuds without the case, make sure to disconnect them from any Bluetooth devices first.

If your Bluetooth earbuds are not charging, it could be for a few reasons. The most common reason is that the earbuds are not properly connected to the charging port. It’s also possible that the charging port on the earbuds is damaged, in which case you’ll need to replace the earbuds. and it’s also possible that the battery of your earbuds would be defective.

Closing Remarks:

There are many ways to charge your Bluetooth earbuds. The most common way is through a USB port, either on your computer or on a wall charger. Some newer models also come with wireless charging capabilities.

However, if you choose to charge them, make sure you do so safely and according to the manufacturer’s instructions. Doing so will help prolong the life of your earbuds and keep them working properly.

Have you ever had trouble charging your Bluetooth earbuds? What method do you prefer?

Let us know in the comments below!

Author at Budsera
Bilal Naeem is the Tech Gadgets Reviewer and Author of, He was born in Pakistan and has lived most of his life in Lahore. He loves to write about Technology and Gadgets. You can visit his site (Get the earbuds Habit!)
Bilal Naeem

2 thoughts on “How to Charge Bluetooth Earbuds:”

  1. The Pom earbuds did not include a cable in the box
    Is it a standard usb cable?
    Usb to mini
    Mine does not fit?
    Where can I find the right cable?
    It’s infuriating one specific cable is needed and not a standard cable which it seems does not match this product
    Where to get the cable or throw out the earbuds …

    • Sure, I’d be happy to help you out. It sounds like the Pom earbuds you got didn’t include the right cable, and you’re wondering about the type of cable you need. If the cable you have doesn’t fit, it might not be the right one. You’re frustrated because these earbuds need a specific kind of cable, not a regular one like you expected. You’re looking for information on where to find the correct cable so you can use your earbuds properly. I understand your frustration, and I suggest checking with the place where you bought the earbuds or looking online for the specific cable you need. This way, you can avoid having to throw away the earbuds.


Leave a Comment